New Eqpt Rent Used Eqpt Sale

Atlas Copco Boomer E3C

Be the first to review this product

Equipment ID : skudrillrigs_5
Category : Hydraulic Drilling Rigs (Drill Jumbo)
Brand : Atlas Copco
Model : Boomer E3C
Description : Face drilling rigs Boomer E3 C Equipped with COP 3038 rock drills

Equipment Details

Equipment Specification
Brand Atlas Copco
Model Boomer E3C
Coverage Dimension
Coverage Area up to 137 m2
Max. Coverage height 10300 mm
Max. Coverage width 15250 mm
Traming Specifications
Width 2 926 mm
Height with cabin 3 664 mm
Height cabin up 4756 nm (up/down)
Ground clearance 438 mm
Turning radius 11 900/6 300 mm (outer/inner)
Total Weight 41200 kg
TRAMMING SPEED On flat ground (rolling resistance 0.05) >15km/hr,On incline 1:8 >5 km/hr
Gradeability/n inclination 1:4 (Gradeability at max. load on drive wheels)
HYDRAULIC ROCK DRILL
Description High-frequency COP 3038 rock drills with dual-damping system for optimal consumable life Pressurized housing and mating surfaces to reduce internal contamination of the rock drill
Rock drill COP 3038
Impact/Percution power 30 kW
Impact/Percution rate 102 Hz
Hydraulic/Percution pressure 200 bar
Rotation system pressure Separate rotation
Rotation speed 0-380 rpm
Rotation torque, max 190 Nm
Water consumption, max 130–190 l/min
Shank adapter TC42
Height over drill centre (Profile Height) 84 mm
Length without shank 970 mm
Weight 165 kg
Sound level <106 dB(A)
Boom
Model BUT 45 L
Parallelism/Parallel holding complete
Boom Extension 2500 mm
Boom/Feed Roll over angle 190° (Feed roll-over)
Boom Weight 3200 kg
Feed
Description Feed prepared for Rod Adding System (RAS) and Rod Handling System (RHS E)
Model BMH 6916
Feed force 22.0 Kn
Feed extension 1800 mm
Drill steel length 4920 mm
Hole depth 4668 mm
Weight 700 kg
Optional feed BMH 6914 BMH 6918 BMH 6920 BMH 6921
Air System
Description Hydraulically driven screw compressor Atlas Copco GAR 5
Air Discharge Capacity/Flow 26 l/s
Air Discharge pressure 9 bar
Water system
Description Hydraulic water booster pump Johnson
Water booster flow/dischage Capacity 750 l/min
Pump boosting pressure 30 bar
Electrical system
Total Installed power 293 kW
Main (Power apack) motor power 3 x 95 kW
Voltage 690–1 000 V
Frequency 50–60 Hz
Hydraulic system
Hydraulic pumps Description 3 separate units, one for each boom
System pressure, max 250 bar
Carrier
Engine Description Deutz 6-cylinder, TCD 6.1 L06 4V Tier 4i/Stage IIIB approved4-stroke water-cooled diesel engine with catalyser and particle filter
Engine Rated Power 180 kW @ 2300 rpm
Engine Rated Torque 1000 Nm @ 1450 rpm
Steering System Hydrostatic power steering system
Transmission Description Hydrodynamic transmission
Front axle description Dana 32000
Rear axle description Dana 213, ±7° oscillation
Service filling capacity
Hydraulic Oil Tank Capacity 755/470 l
Fuel tank Capacity 150 l

Write Your Own Review

You're reviewing: Atlas Copco Boomer E3C

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating